Table of Contents
Advertisement
Air and water reels
Models 83753 and 83754
Series B
June 2014
Date of issue
Form number
404665A
Section
E35
Page
83A
D A N G E R
Read manual prior to installation or use
of this product. Keep manual nearby for
future reference. Failure to follow
instructions and safety precautions may
result in death or serious injury.
Installation and maintenance guide
Advertisement
Table of Contents
Related Manuals for Lincoln 83753
Summary of Contents for Lincoln 83753
- Page 1 Installation and maintenance guide Air and water reels Models 83753 and 83754 Series B June 2014 Date of issue D A N G E R Form number 404665A Read manual prior to installation or use Section of this product. Keep manual nearby for Page future reference.
- Page 2 (bar) external threads external threads not observed. • Ensure that reel is properly installed 83753 300 (21) in. x 50 ft. 34.5 (15,6) in. NPTF in. NPTF before connecting input and output (9,5 mm x 15,2 m) hoses.
- Page 3 Fig. 1 Notice Do not use rigid plumbing. Use flexible hose connection at input. Do not exceed recommended torque of 70 ft.lbf. (94 Nm). Model 83753 requires inch NPTF hose and Model 83754 requires inch NPTF hose. Connecting hose not included.
- Page 4 Adjust hose bumper Position guide arm Replace latch pawl 1 Pull out hose until latch pawl engages. 1 Remove the guide arm. 1 Retract hose onto reel until bumper is 2 Loosen slotted screws shown in fig. 6. against guide rollers and latch pawl is not 3 Slide the bumper to desired position.
- Page 5 Use flexible hose connection at input. swivel may be damaged. Do not exceed recommended torque 7 Remove the hose. of 70 ft.lbf. (94 Nm). Model 83753 swivel assembly has inch NPTF internal threads and Model Install hose 83754 swivel assembly has inch 1 Route the hose through the guide arm NPTF internal threads.
- Page 6 Parts Illustrated parts breakdown Item no. Description Quantity Swivel assembly Nut M6 Snap ring 19 Washer 18 Adjust washer Spring case cover Drive spring assembly Arbor Spring case stud Spring case Spring case sheave Hex washer screw Sheave flange Screw M5 x 12 Hose clamp Nyloc nut M5 Screw M10 x 30...
- Page 7 Illustrated parts breakdown Item no. Description Quantity Ratchet and spacer assembly Step nut Main shaft spacer Main shaft Bolt GB/T 12 M8 x 18 Base Washer GB/T 93 16 Nut GB/T6170 M16 Guide arm Nyloc nut M8 Hose assembly Bumper assembly Universal roller Screw M5 x 12 Latch pawl assembly...
- Page 8 This page intentionally left blank.
- Page 9 This page intentionally left blank.
- Page 10 This page intentionally left blank.
- Page 11 (international number 01-314-679-4200) required. or you may also use our website In no event shall Lincoln be liable for inci- www.lincolnindustrial.com dental or consequential damages. Lincoln’s liability for any claim for loss or damages...
- Page 12 ® SKF is a registered trademark of the SKF Group. ® Lincoln is a registered trademark of Lincoln Industrial Corp. © SKF Group 2014 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permis- sion is granted.