Lincoln B Series Manual

Swivel
272397
WARNING
©
Systems which will be dispensing fl uids under pressure
may need to be protected by using a thermal relief kit which
will safely limit the pressures caused by thermal expan-
sion. Please contact your local Lincoln distributor and refer
to Section K5, Page 31 for more details. Failure to include
thermal relief protection may cause damage not covered
under Lincoln's warranty policy.
Before meter can be placed in service "After Repair", Meter
must be tested and approved in accordance with U.S. Gov-
ernment's Weights and Measures Standards.
New metering systems must be purged prior to installation
of metering control valve to free system of contaminates.
OPERATION
The meter can handle petroleum products such as automatic
transmission fl uid, S.A.E. 5 to 50 weight motor oil, S.A.E. 80 to
240 weight gear oil and antifreeze fl uid (ethylene glycol).
The meter can be locked in the on position by engaging the trig-
ger lock, to release the lock the trigger must be depressed thus
releasing the lock. Before each use reset the meter by rotating
the indicator knob counterclockwise to zero.
©
Indicates change
JULY 2010
(IOM-114-02 P/N 53400-114
Rev. 2)
Hose
273862
45°
Adaptor
273493
Form 404131
METERING CONTROL VALVE
SPECIFICATIONS:
Dial Capacity 8 Pints - Pints
Totalizer Pints
Flow Max. 4 Gallons per min. (15 liters per min.)
Flow Min. 0.4 Gallons per min. (1.5 Liters per min.)
Operating Pressure Max. 1000 PSI (70 Bar)
Operating Temp. Max. 110° F (45° C)
Accuracy +/- 0.65%
Weight 3.3 Lbs. (1.5 Kg.)
Meter Inlet Threads 1/2 NPT
Section
MODEL 878
Series "B"
- 3D
- F22
Page