Updating The Firmware Of Opte6 Option Board - Vacon CANopen OPTE6 User Manual

vacon • 60 Commissioning
7.3

Updating the firmware of OPTE6 option board

®
The VACON Loader can be downloaded from http://drives.danfoss.com website. It has been
®
bundled with the VACON Live software package.
To update the option board firmware, follow the steps below.
® ® ®
NOTE! With VACON 20, the baud rate 9600 must be used. With VACON 20 X and VACON 20 CP,
the following baud rates are supported: 9600, 19200, 38400 or 57600.
Step 1. Connect your PC to the controller by using the USB/RS485 cable.
Then select the firmware file which you want to load to the option board and double click it. This will
®
start the VACON Loader software. You can also start the program from the Windows Start menu.
In this case, select the firmware file using the "Browse"-button (see Figure 12).
®
Figure 12. VACON Loader: File selection
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
7