Table of Contents
Advertisement
vacon • 52
Open the necessary holes in the cable entry plate. Do not open the other holes.
6
See the VACON
Attach a cable gland on the hole in the ca-
ble entry plate. Pull the fieldbus cable
through the hole.
NOTE! The fieldbus cable must go through
the correct cable entry plate to avoid going
near the motor cable.
7
Put the cable entry plate back.
8
Close the cover of the AC drive.
9
6
®
100 X Installation Manual for the dimensions of the holes.
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
Installation
11642_00
Advertisement
Table of Contents
