Installing The Option Card - YASKAWA PG-F3 Installation Manual

◆

Installing the Option Card

Insert the option card into the CN5-C connectors located on the drive's control board.
See the drive manual for directions on removing the front cover.
1.
Shut off power to the drive, wait the appropriate amount of time for voltage to
dissipate, then remove the operator and front cover.
2.
Insert the CN5 connector on the option card into the matching CN5 connector on
the drive, then fasten it into place using one of the screws included with the option
card.
Figure 3
A
B
C
D
A – Connector CN5-C
B – Connector CN5-B
C – Connector CN5-A
D – Drive grounding terminal (FE)
E – Insert connector CN5 here
F – Option card
YASKAWA ELECTRIC TOBP C730600 51A YASKAWA AC Drive-Option Card PG-F3 Installation Manual
H
G
I
Figure 3 Installing an Option Card
4 Electrical Installation
E
F
G
J
L
G – Mounting screw
H – Lead line
I – Use wire cutters to create an opening
for cable lines
J – Front cover
K – Digital operator
L – Terminal cover
K
11