Loading Software Upgrades; Default Settings; Wavemaster And Wavepro 7000A Series Scopes - LeCroy WaveMaster 8600A Operator's Manual

installed options, proceed as follows:
1. In the menu bar, touch
2. Touch the
You can find information related to hard drive memory, etc. as follows:
1. Minimize the instrument application by touching
drop-down menu.
2. Touch the Start taskbar button and, per usual Windows® operation, open Windows
Explorer.

Loading Software Upgrades

You can download software upgrades from the LeCroy Web site at www.lecroy.com. Follow the
on-screen instructions to download the software. Click the Release Notes link to learn about new
features and fixes.

Default Settings

WaveMaster and WavePro 7000A Series Scopes

You can reset the scope to default settings by simply pressing the Default Setup push button
on the front panel. This feature turns on Channel1 and Channel 2, with no processing
enabled.
Other default settings are as follows:
Vertical
50 mV/div 50.0 ns/div
10.0 GS/s (WaveMaster, WavePro,
DDA, SDA)
0 V offset
5 GS/s (WaveRunner)
1 GS/s (WaveSurfer)
0 s delay
WM-OM-E Rev I
X-Stream Operator's Manual
.
tab.
Timebase
, then selecting Minimize in the
Trigger
Coupling: DC (WaveSurfer), DC50
(WaveMaster, DDA, SDA), AC1M
(WavePro)
Channel: C1
Level: 0 mV
edge trigger
positive edge
Auto trigger mode
65