Using X-Stream Browser To Obtain Status Information - LeCroy WaveMaster 8600A Operator's Manual

Using X-Stream Browser to Obtain Status Information

Example:
Here is a case of an overflow condition, in which the amplitude of the waveform cannot be
determined:
1. Minimize the scope display by selecting File Minimize.
2. Touch the X-Stream Browser desktop icon to open the browser:
3. Touch the left scope icon ("Connect to a local X-Stream DSO device") in the X-Stream
Browser toolbar:
4. Select Measure Parameter in error (P1) Out Result:
WM-OM-E Rev I
X-Stream Operator's Manual
167