Customdso Basic Mode; Editing A Customdso Setup File - LeCroy WaveMaster 8600A Operator's Manual

CustomDSO Basic Mode

The Basic CustomDSO mode offers eight Action buttons, each of which can call a different setup
when touched. The "Action Definition" dialog is used to enter a CustomDSO setup file name by
means of the pop-up keyboard.
By clicking the checkbox , the eight CustomDSO
buttons will continue to be available at the bottom of the screen after you close the CustomDSO
dialog. Furthermore, they will appear automatically each time the scope is powered up.

Editing a CustomDSO Setup File

If the file does not exist, touch the Edit button ; a dialog will appear for you to create
the file. If the file does already exist, the Edit button enables you to modify it. The Edit button allows
you to edit the file that is named in the Setup file to recall field, and not the file of the setup that the
instrument is currently in, unless these happen to be the same.
In the example used here, three setup files were made, called CustomA.lss, CustomB.lss and
CustomC.lss. Fragments from all three are shown below.
1160 Set CustomDSO = XStreamDSO.CustomDSO
1161 ' CustomDSO Setup A.lss
324
WM-OM-E Rev I