Simple Excel Example 2 - LeCroy WaveMaster 8600A Operator's Manual

X-Stream Operator's Manual
To get the output values in column C, we set C2 = - A2 and copy this formula down the column. This
is the only action needed in Excel, and can be seen in the next figure:

Simple Excel Example 2

In this example we use Excel to invert or negate a waveform. The first figure shows a part of the
instrument screen. The upper trace (C1) is the original signal. The lower trace (F1) is the result
calculated in Excel and displayed on the screen.
269
WM-OM-E Rev I