Flash Options; Factory Reset - Sinar Medium Format Camera System Hy6 Operating Manual

O E
PERATING LEMENTS
8.2.5

Flash Options

1
Fig. 8 / 11 Select flash mode / Button B8
1
Hot Shoe
Flash Options
Connect the external flash device. Via the hot shoe, SCA and TTL-flash
Hot Shoe
measurement is possible.
Open the menu for the setting of the flash options (normal sync / rear
Flash Options
sync) and the flash compensation.
B9
Please note: An inappropriate use of the flash device may be harmful to the
eyes. Please refer to the operation instructions and to the safety advice
contained in the technical documentation of manufacturer of your flash
device!
The flash operation is described in more detail in
8.2.6

Factory Reset

1
Fig 8 / 13 Factory Reset
Fig. 8 / 12 Display
The indication of the flash mode in the
display is marked with a black ellipsis in Fig.
8 / 12. In the example above, Rear Sync has
been selected.
chapter 13 "Use of the flash".
The camera is reset to the factory settings
according to the following procedure:
Switch off the camera, and then switch the
camera on.
Press the button "Factory Reset" 1 and
simultaneously press the Release Button B1
to the first pressure point.
43