Page 1
Sinar m will add significant convenience to your work. Its robust and pre- cise construction will bring you long and trouble-free operation. Before you use your Sinar m camera for the first time, please read this in- struction manual carefully. It will help you to use the camera correctly, thus avoiding difficulties that might arise from improper use.
Page 2
Slider Type Plate Focal Plane Shutter El. Contacts Jack for Hand Release 12V Power Supply Socket Diagram 1: Sinar m, rear view Display Release Button Front Dial Rear Dial Upper Wheel Eylets for Switch 1 Straps Lower Wheel Switch 2...
Diagram 3: Sinar m, view from the bottom and the left Tripod Socket, left ( System Contacts, left System Contacts, bottom Tripod Socket, bottom ( Table of Contents Page Introduction ... A Camera Diagrams ... C Extent of Delivery ... 2 Use ...
CD-ROM with Sinar CaptureShop™ Quick Reference 02.8302 The Sinar m is a versatile modular camera body. It can be used as a shutter for the Sinar p3 view camera as well as a stand-alone 35 mm or medium format camera (see also the example configurations, diagrams 4 to 11 ).
Notice: Check if the adapter plate is locked in place correctly. 8. Mount the bellows on the front of the Sinar m and lock it by pushing both locking sliders inwards. When using lenses with focal lengths shorter than 90 mm we recommend the use of a wide angle bellows.
PCI Board 2, too. 17. Start the Macintosh computer. 18. Switch on the Sinar m by pushing the on/off switch forwards for about two seconds (confirmed with an acoustic signal). 19. When using a Sinarback with fiber optics interface, the option “Back Power Supply”...
5. Remove the Light Gate of the Sinar m (except when a Hasselblad Lens Module 493.64.012 is used). 6. Mount the mirror module or the lens module on the front of the Sinar m and lock it by pushing both locking sliders inwards. Check if the mir- ror module or the lens module is locked in position correctly.
PCI Board 2, too. 12. Start the Macintosh computer. 13. Switch on the Sinar m by pushing the on/off switch forwards for about two seconds (confirmed with an acoustic signal). 14. When using a Sinarback with fiber optics interface, the option “Back Power Supply”...
2. While pressing the shutter release button, switch on the camera at the same time. In the diagrams in the chapter Menu Structure of the Sinar m the param- eters that correspond to the default factory settings are highlighted gray.
Front Dial. The parameters indicated below the title can be varied by turning the Rear Dial (also see chapter Menu Structure of the Sinar m on page 16). Notice: Some of the settings exclude each other mutually or are de- pending one from another.
Switch 3: EXP Center of Display Top of Display Bottom of Display (Front Dial) (Rear Dial) This function is not available with Sinar CaptureShop™ version 4.x. Switch 3: WB Center of Display Top of Display Bottom of Display (Front Dial) (Rear Dial) This function is not available with Sinar CaptureShop™...
Page 12
Center of Display Top of Display (Front Dial) Switch 4: OPT Center of Display Top of Display (Front Dial) Bottom of Display (Rear Dial) This function is not avail- able with Sinar Capture- Shop™ version 4.x. Bottom of Display (Rear Dial) continued on next page...
For example, the live video can only be switched on and off at the Sinar m. The exposure time chosen on the Sinar m has to be as long as or shorter than the exposure time chosen on the Sinar CaptureShop™.
Need help?
Do you have a question about the m 493.03.000 and is the answer not in the manual?
Questions and answers