List Of Error Display / Troubleshooting; Operator Call Errors - Canon iX7000 Series Service Manual

iX7000

2. LIST OF ERROR DISPLAY / TROUBLESHOOTING

Errors and warnings are displayed by the following ways:
1. Operator call errors are indicated by the Alarm LED lit in orange, and the error messages are
displayed by the printer driver Status Monitor.
2. Error codes (the latest 10 error codes at the maximum) are printed in the "operator call/service call
error record" area in EEPROM information print
Buttons valid when an operator call error occurs:
1. Power button: To turn the printer off and on again.
2. Resume/Cancel button: To cancel the job at error occurrence, and to clear the error.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
Alarm
LED
Error
blinking
in orange
2 times No paper in the
rear tray.
No paper in the
cassette.
No paper in the
manual feed slot..
3 times Front tray closed.
Paper jam in the
rear tray.
Error U No.
code
[1000] --- Confirm that the rear tray is
selected as the paper source.
(The rear tray is only for photo
papers and post cards.) Set the
paper in the rear tray, and press
the Resume/Cancel button.
[1003] --- Confirm that the cassette is
selected as the paper source.
(The cassette is only for plain
paper.) Set the paper in the
cassette, and press the
Resume/Cancel button.
[1005] --- Confirm that the manual feed is
selected as the paper source.
(Manual feeding is available
only with plain paper.) Set the
paper in the manual feed slot,
and press the Resume/Cancel
button.
[1250] --- Open the front tray. (The error
is indicated when the front tray
is not opened at start of
printing, or when the front tray
is closed during printing.)
[1300] --- Remove the jammed paper or
foreign material causing a paper
9 / 53
TABLE OF CONTENTS
Solution
Parts that are likely
to be faulty
- ASF unit
- Pressure roller unit
- PE sensor
- Paper feed motor
- ASF unit
- Cassette
- Bottom case unit
- Bottom case unit
- ASF unit
- Pressure roller unit