Canon iX7000 Series Service Manual page 16

16 times No Clear ink
(during printing).
No Clear ink
(printing is not
performed).
Clear ink tank not
installed.
17 times No ink (no raw
ink).
tank(s).
[1693] U165 Replace the Clear ink tank, or
press the Resume/Cancel button
to clear the error without ink
tank replacement. When the
error is cleared by pressing the
Resume/Cancel button, the print
job is cancelled.
Printing on plain paper cannot
be performed until the Clear ink
tank is replaced with a new one.
If the error persists even after
replacement of the Clear ink
tank, press and hold the
Resume/Cancel button in the
user mode until the Alarm lamp
blinks 9 times, release the
button, then remove and re-
install the Clear ink tank.
[1694] U166 Replace the Clear ink tank, and
press the Resume/Cancel
button.
Unless the Clear ink tank is
replaced with a new one, the
error will not be cleared only by
pressing the Resume/Cancel
button.
If the error persists even after
replacement of the Clear ink
tank, press and hold the
Resume/Cancel button in the
user mode until the Alarm lamp
blinks 9 times, release the
button, then remove and re-
install the Clear ink tank.
[1696, --- Install the Clear ink tank.
1697]
[1688, U172 Replace the empty ink tank(s).
1698] This error is indicated when the
applicable ink tank has never
been removed until ink is used
up. (Printing cannot be
continued even when the
Resume/Cancel button is
pressed for 5 sec. or longer.)
If the ink tank is removed and
re-set again (without being
13 / 53
- Clear ink tank
- ASF unit
- Valve unit
- Logic board
- Clear ink tank
- ASF unit
- Valve unit
- Logic board
- Clear ink tank holder
- Logic board
- Ink tank
- Logic board
- Carriage unit