Canon iX7000 Series Service Manual page 5

head alignment - When print quality is
Grease
application
Ink system
function check
LF / Eject
correction
*1: Install the Service Tool to a pre-registered computer.
The screws securing the paper feed motor may be loosened only at replacement of the
paper feed motor unit. DO NOT loosen them in other cases.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this printer that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
not satisfying
- At carriage unit
replacement
- At other part
replacement
- At logic board
replacement
- At spur unit
replacement
- At carriage unit
replacement
- At logic board
replacement
- At paper feed roller
replacement
- At platen unit
replacement
To maintain sliding
properties of the carriage
shaft, other sliding parts,
and gears.
To maintain detection
functionality for presence
of the ink tanks and each
ink tank position.
To correct the paper
feeding amount according
to each LF and eject roller.
2 / 53
FLOIL KG-107A 1 min.
*1
1 min.
Service Tool
Perform in the
service mode.
*1
5 min.
Service Tool
Perform in the
service mode.