Rain Bucket Edit - Toro Micro-Master Series User Manual

Micro-Master Touch User Guide
Rain Cancel
This setting determines the total rainfall level at which the rain switch will be set and prevent irrigation
from starting.
Allocated Input
Any switch input on the main screen panel or digital input module in an Expansion Module position
can be selected as the input for the Rain Bucket.
Total and Current Rate
The total and current rate items show the real time total rainfall and current rain rate for the rain
bucket. The rain rate and total rainfall are updated for every pulse sensed on the allocated input.
The total rain is logged each hour for rain day calculation.
Note that the total rainfall and current rain rate use the currently saved values for the rain bucket.
Any change in the rain bucket parameters is not used by the rain bucket until the accept button is
pressed.

14.7.2 Rain Bucket Edit

The Rain Bucket Edit screen is displayed by pressing the icon on the Sensor Selection
screen.
Figure 76 - Rain Bucket Edit
Rain Bucket Name
The Rain Bucket can be assigned a name. Names are limited to 20 characters. Selecting the name
button and clicking Edit will display the Text Edit screen.
© 2014 Toro Australia Pty Ltd 104 Ver 1.2, June 2014