Global Setup - Toro Micro-Master Series User Manual

Micro-Master Touch User Guide

Global Setup

5.10
The Global Setup screen is displayed by pressing the icon on the Setup Selection screen.
Figure 19 - Global System Configuration
Reset Controller
Clicking on Reset Controller will select the item, changing the background to light blue. Selecting
Reset Controller and then clicking Edit will display a confirmation screen. If confirmed, the controller
will reset the controller to the factory default condition.
Reset Totals / Logs
Clicking on Reset Total / Logs will select the item, changing the background to light blue. Selecting
Reset Totals / Logs and then clicking Edit will display a confirmation screen. If confirmed, the
controller will reset the controller totals and logs to zero. This option does not erase the configuration
of programs, sensors etc.
Backup Controller
Clicking on Backup Controller will select the item, changing the background to light blue. Selecting
Backup Controller and then clicking Edit will display a confirmation screen. If confirmed, and a USB
flash storage device is connected, the controller will backup the controller configuration and totals to
the USB flash storage device.
Restore Controller
Clicking on Restore Controller will select the item, changing the background to light blue. Selecting
Restore Controller and then clicking Edit will display a confirmation screen. If confirmed, and a USB
flash storage device with a valid backup file is connected, the controller will restore the controller to a
previously saved controller configuration.
© 2014 Toro Australia Pty Ltd 30 Ver 1.2, June 2014