Pump Set Advanced Parameters - Toro Micro-Master Series User Manual

Pump Sets can be enabled or disabled. Clicking on the tick (cross) will change the Pump Set to
disabled (enabled).
Individual Pump Stations can be enabled or disabled. Clicking on the tick (cross) will change the
Pump Station to disabled (enabled).
11.4

Pump Set Advanced Parameters

There are three advanced setting pages for each pump set. Page 1 sets the pump delays. Page 2
allocates a flow meter for the pump. The flow meter does not have to be different for each pump set.
The same flow meter can be used for any, or all programs, chemicals, and pump sets Page 3 shows
the current status and totals for the pump set.
Pump Set Delays
The Delays screen is the first page of Advanced Pump Set Parameters and is displayed by pressing
the icon on the Pump Set Edit screen.
Figure 45 - Pump Set Advanced Parameters Edit - Page 1
Delay Times
Clicking on a pump delay item will select the item, changing the background of the selected item to
light blue. Selecting an item and then clicking Edit will display the Number Edit screen.
© 2014 Toro Australia Pty Ltd
Micro-Master Touch User Guide
Pump Set Enable
Pump Station Enable
68 Ver 1.2, June 2014