Chemical Advanced Parameters - Toro Micro-Master Series User Manual

Micro-Master Touch User Guide
blue. Selecting the Allocated Flow Meter and then clicking Edit will display the Control Selection
screen.
Mix During Irrig.
When enabled, the mix/prewet station (if assigned) will remain on while injection is operating. When
disabled, the mix/prewet station will stop when injection commences.

Chemical Advanced Parameters

13.4
The Status and Totals screen is the only page of Advanced Chemical Parameters and is displayed by
pressing the icon on the Chemical Edit screen.
Figure 57 - Chemical Injection Advanced Parameters Edit - Page 1
Chemical Injection Status
This section shows the current status of the Chemical Injection.
Chemical Injection Totals
This section shows the current totals for the Chemical Injection. Clicking the clear button will clear
the totals.
© 2014 Toro Australia Pty Ltd 81 Ver 1.2, June 2014