Switch Sensor Edit - Toro Micro-Master Series User Manual

Micro-Master Touch User Guide

14.9.3 Switch Sensor Edit

The Switch Sensor Edit screen is displayed by pressing the icon on the Switch Sensor List
screen.
Figure 83 - Switch Sensor Edit
Switch Sensor Name
Each Input can be assigned a name. Names are limited to 20 characters. Selecting the name button
and clicking Edit will display the Text Edit screen.
Initial Delay
The setting adjusts the delay time used during initial irrigation start. Selecting the Initial Delay button
and clicking Edit will display the Number Edit screen.
Scan Delay
The setting adjusts the delay time used during operational scanning. Selecting the Scan Delay button
and clicking Edit will display the Number Edit screen.
Switch Sensor Enabled
Inputs can be enabled or disabled. Clicking on the tick (cross) will change the Input to disabled
(enabled).
© 2014 Toro Australia Pty Ltd 113 Ver 1.2, June 2014