Life Support Screen - Toro Micro-Master Series User Manual

Micro-Master Touch User Guide

Life Support Screen

17.2
The Life Support Edit screen is displayed by pressing the icon on the Setup Selection
screen.
Figure 92 - Life Support Edit
In the example screen shown in Figure 92, when the Life Support button on Master Unit Expansion
Module 1 is pressed, the module will perform an irrigation for 30 minutes on stations 1, 4 and 5, then
a 1 minute rest with only station 1 active, then groups 3 and 4.
Note that Life Support is local to a unit, hence life support would need to be setup for each unit.
Life Support Master/Remote
Clicking on the Master/Remote item will select the item, changing the background of the selected
item to light blue. Selecting the Master/Remote item and then clicking Edit will change the item from
Master to Remote.
Life Support Sequential/Grouping
Clicking on the item will select the item, changing the background of the selected item to light blue.
Selecting the Sequential/Grouping item and then clicking Edit will change the item from Grouping to
Sequential.
Life Support Repeats
Clicking on the Repeats item will select the item, changing the background of the selected item to
light blue. Selecting the item and then clicking Edit will display the Number Edit screen.
© 2014 Toro Australia Pty Ltd 124 Ver 1.2, June 2014