Using The Rain Pause Function - Toro TIS-240 User Manual

Using the Rain Pause Function

Use the RAIN PAUSE function to delay scheduled watering for
up to 14 days. When the delay period has ended, the controller
will resume normal scheduled operation.
Note: Stations with None selected for the Usable Rainfall value
are not affected by the Rain Pause delay and will continue to
operate as programmed.
Note: Manual watering operations can be used while the controller
is in the Rain Pause mode.
Note: The Intelli-Sense is designed to operate in conjunction with
an external Rain Sensor. Toro Rain Sensor models TWRS and
TWRFS (for rain and freeze detection) are specifically designed
for Toro controllers and are available from all authorized Toro
distributors. See "Connecting a Rain Sensor" on page 73 for
additional information.
1.
Turn the Function Selector knob to RAIN PAUSE to view the
following display:
RAIN PAUSE ALL STATIONS
00 Days to Resume
2. To initiate the Rain Pause mode, turn the Lower Line knob to
select 1 – 14 days.
Note: The controller counts down one day each time the clock
time passes Midnight. If Rain Pause is set for 01 day, it will be
released at Midnight, enabeling watering to resume the next
day as scheduled. The remaining number of days until scheduled
watering resumes will be displayed while the Rain Pause
function is selected. The example below indicates three days
remaining until watering resumes.
RAIN PAUSE ALL STATIONS
03 Days to Resume
3. Turning the Function Selector knob to the RUN position will
display Rain Pause while automatic controller operation is
on hold.
Nov 18 2006
Rain Pause
12:14:27pm
M:
47