Technical Specifications - Toro Micro-Master Series User Manual

20

Technical Specifications

Main Input Power
240 volt 50 Hz single phase - Standard
12 volt DC (11 volt minimum - 17 volt maximum)
Typical Power Ratings
240 volt input power :
12 volt input power:
Output Power
Station Capacity :
Pump Start Capacity:
Total Unit Capacity:
Input Function
8 user configurable logic inputs
Input Impedance:
4 user configurable logic outputs
Operation:
Power Cable
AC Models supplied with " 2-core-and-E " circular cable and a 7.5 Amp three-pin flat-pin plug
complying with Fig. 1a of Australian Standard AS 3112.
DC Option supplied with 4 way bypass plug to supply external DC power.
© 2014 Toro Australia Pty Ltd
Micro-Master Touch User Guide
60mA when idle
220mA at full station capacity
80mA when idle and screen blank
200mA when idle and screen on
240 mA with screen on, two station relays activated ( one
valve, one pump )
24 volt AC at 2.0 Amp max. 8 (2 watt valves).
12 volt DC at 2.0 Amp max.
24 volt AC at 1.0 Amp max.
12 volt DC at 1.0 Amp max.
24 volt AC at 2.0 Amp max.
12 volt DC at 2.0 Amp max.
6800 ohm
Normally open contacts closing to ground
132 Ver 1.2, June 2014