Lenovo Storage D1212 Hardware Installation And Maintenance Manual page 131

Syntax:
setdriveindicator <drive>
drive
Example:
0+03:03:11.579 M0 GEM> setdriveindicator 1
0+03:05:17.297 M0 GEM>
settime
Sets the current log time for the enclosure. Setting the log time on one ESM synchronises it with the partner
ESM, if present. An uptime (time since enclosure start) or a calendar time may be specified. The log time
does not survive a power cycle and may drift if not refreshed regularly. When run without arguments, the
current log time may be queried.
Syntax:
settime [[options] [time]]
options
-c
-u
If no time format option is specified, <time> takes the uptime format .
Example:
0+07:38:26.383 M0 GEM> settime 100 11 20 5
0+07:38:40.750 M0 GEM> settime
Current Time: 100+11:20:13.748
0+07:38:48.755 M0 GEM> settime -u 120 23 0 44
0+07:39:09.491 M0 GEM> settime
Current Time: 120+23:00:46.740
0+07:39:11.745 M0 GEM> settime -c 2016 6 6 19 59 0
0+07:39:42.549 M0 GEM> settime
Current Time: 2016-06-06 19:59:03.163
0+07:39:45.173 M0 GEM>
ver
Retrieves the firmware version information for the enclosure.
Syntax:
ver
Example:
0+07:41:18.270 M0 GEM> ver
Canister firmware
Canister firmware date
Revision control hash
Product build type
Canister bootloader
Canister config CRC
The 0-based ID of the drive bay for which the locate indication is to be displayed
<time> argument is calendar time in the format:<year> <mon> <day> <hr> <min> <sec>
<time> argument is up-time in the format: <days> <hrs> <mins> <secs>
: 5.0.0.7
: Jun 14 2016 16:15:32
: 0bb77f0a3cee571e58f07b606167c73db20c50e1
: sbb_sas
: 1.01
: 0x91B3C0F7
.
Chapter 7 GEM CLI Commands
111