Operator's Panel Leds (5U Enclosures) - Lenovo Storage D1212 Hardware Installation And Maintenance Manual

Table 13. Ops Panel LED States (continued)
System Power Module
(Green/Amber) Fault
(Amber)
On Off
On On
On On
On On
Flash
On
On Flash
On
On
Flash
On

Operator's Panel LEDs (5U Enclosures)

The operator's (ops) panel (see Figure 58 "Ops Panel LEDs " on page 57) displays the aggregated status of
all the modules.
56
Lenovo Storage D1212/D1224/D3284Hardware Installation and Maintenance Guide
Location LED Associated LEDs/
(Blue) (not Dis- Alarms
used) play
X
X PCM fault LEDs,
fan fault LEDs
X SBB module LEDs
X No module LEDs
X Module status LED
on SBB module
X PCM fault LEDs,
fan fault LEDs
X Array in failed or
degraded state
X Array in impacted
state
X
SES state S1
X Flash
Status
Power on, all functions good
Any PCM fault, fan fault, over or under
temperature
Any SBB module fault
Enclosure logical fault
Unknown (invalid or mixed) SBB
module type installed, I2C bus failure
(inter-SBB communications), JBOD
VPD configuration error
Unknown (invalid or mixed) PCM type
installed or I2C bus failure (PCM
comms)
Drive failure has occurred causing loss
of availability or redundancy
Arrays operating background function
Enclosure ID setting different from
"start of day" setting
Enclosure identification or invalid ID
selected