Comm, Setup, And Dig Out Menus; Table - Keithley 2520 User Manual

1-20 Getting Started

Table 1-5

COMM, SETUP, and DIG OUT menus

COMM
COMMUNICATIONS SETUP
GPIB
ADDRESS
GPIB PROTOCOL
488.1
SCPI
RS-232
BAUD
BITS
PARITY
TERMINATOR
FLOW-CTRL
SETUP
SAVESETUP MENU
SAVE
RESTORE
POWERON
BENCH
GPIB
USER-SETUP-NUMBER
RESET
BENCH
GPIB
DIG OUT
DIGITAL OUTPUT: 00000
1. Main operating keys in bold.
2. Changing interface causes reset.
1
Menu item
2
Description
Select and set up GPIB or RS-232 interface.
Communications setup menu.
Select and set up GPIB interface.
Set primary address (0-30). Default: 25.
Select protocol (see Appendix
Select 488.1 protocol.
Select SCPI protocol.
Select and set up RS-232 interface.
Set baud rate (300, 600, 1200, 2400, 2800, 9600,
19200, 38400, 57600).
Set data bits (7 or 8).
Set parity (NONE, ODD, or EVEN).
Select terminator (<CR>, <CR+LF>, <LF>,
<LF+CR>).
Select flow control (NONE or XON-XOFF).
Save and recall factory and user setups.
Setup menu.
Save user setups (0-4).
Restore user setups.
Set power-on configuration.
Use BENCH defaults as power-on.
Use GPIB defaults as power-on.
User setup 0-4 as power-on default.
Restore factory default configuration.
Restore bench (front panel) factory defaults.
Restore GPIB (remote) factory defaults.
Set digital output value (0-15; 0-65535 with 2499-
DIGIO 16-bit option).
Model 2520 User's Manual
G).