Rear Panel Summary - Keithley 2520 User Manual

Model 2520 User's Manual
Operation keys:
EDIT
MATH
LOCAL
RECALL
FILTER
DIG OUT
TRIG
SWEEP
PW
DELAY
COMM
SETUP
CONFIG
MENU
EXIT
ENTER
Annunciators:
EDIT
ERR
MATH
REM
TALK
LSTN
SRQ
FILT
ARM
TRIG
Output control:
ON/OFF OUTPUT Turns the source outputs on or off.
Handle:
Pull out and rotate to desired position.

Rear panel summary

The rear panel of the Model 2520 mainframe is shown in
Enter EDIT mode.
Enable math function.
Cancel remote operation.
Display stored readings and timestamp.
Control digital filter.
Set Digital I/O port output value.
Trigger a measurement from the front panel.
Start configured sweep.
Set laser diode current source pulse width.
Set laser diode current source pulse delay period.
Select remote interface, set GPIB and RS-232 operating parameters.
Save/recall default or user instrument setup configurations.
Press CONFIG and then appropriate key to configure function or operation.
Access and configure Main Menu selections. When entering numeric data, use to
clear reading to minimum absolute value.
Cancels selection. Use to back out of menu structures.
Accepts selection.
Instrument in edit mode.
Questionable reading, invalid cal step.
Math function enabled.
Instrument in GPIB remote mode.
Instrument addressed to talk over GPIB.
Instrument addressed to listen over GPIB.
Service request over GPIB.
Digital filter enabled.
Source-measure operations being performed.
External trigger source selected.
Getting Started
Figure 1-2.
1-7