Table of Contents
Advertisement
Model 2520 User's Manual
Restoring setups
1.
2.
3.
Power-on configuration
You can also define which of the stored setups (factory default or user) the instrument
assumes as the power-on configuration as follows:
1.
2.
3.
4.
Factory default settings
Table 1-3
ating modes available from the front panel. (Some features are available only via remote;
see
Section
follows:
1.
2.
3.
Press the SETUP key.
From the SAVESETUP MENU, select RESTORE, then press ENTER.
Select the setup position (0-4) to restore, then press ENTER to complete the pro-
cess.
Press the SETUP key.
From the SAVESETUP MENU, select POWERON, then press ENTER.
From the SET POWER-ON DEFAULT menu, choose the power-on configuration:
BENCH or GPIB (see below), or USER-SETUP-NUMBER.
If you chose to use a user setup as the power-on configuration, select the user setup
number (0-4), then press ENTER.
summarizes BENCH (front panel) and GPIB (remote) factory defaults for oper-
14.) You can restore either of these default conditions from the front panel as
Press the SETUP key.
From the SAVESETUP menu, select RESET, then press ENTER.
Select BENCH or GPIB defaults as desired, then press ENTER to complete the
process.
Getting Started
1-15
Advertisement
Table of Contents
