Reference Tables - Keithley 2520 User Manual

14-2 SCPI Command Reference

Reference tables

Table 14-1
following list includes the SCPI subsystem commands and the table number where each
command is summarized.
Summary table
General notes:
Brackets ([ ]) are used to denote optional character sets. These optional characters do not
have to be included in the program message. Do not use brackets in the program message.
Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets in the
program message.
The Boolean parameter (<b>) is used to enable or disable an instrument operation. 1 or
ON enables the operation, and 0 or OFF disables the operation.
Upper case characters indicate the short-form version for each command word.
Default Parameter — Listed parameters are both the *RST and :SYSTem:PRESet
defaults, unless noted otherwise. Parameter notes are located at the end of each table.
SCPI — A checkmark () indicates that the command and its parameters are SCPI con-
firmed. An unmarked command indicates that it is a SCPI command, but does not conform
to the SCPI standard set of commands. It is not a recognized command by the SCPI con-
sortium. SCPI confirmed commands that use one or more non-SCPI parameters are
explained by notes.
through Table 14-10
Subsystem
14-1 CALCulate
14-2 DISPlay
14-3 FORMat
14-4 OUTPut
14-5 SENSe
14-6 SOURce
14-7 STATus
14-8 SYSTem
14-9 TRACe
14-10 TRIGger
summarize the commands for each SCPI subsystem. The
I/V, V/I, MX + B, and power math functions.
Display format and messages.
Remote data format.
Source outputs on-off, interlock status.
Laser diode voltage, photodiode current measure-
ments.
Laser diode current, photodiode source configura-
tion.
Instrument status.
System presets, error formats.
Sample buffer access.
Unit triggering control.
Model 2520 User's Manual
Function(s)