Quick Start Guide
Configuring the transmitter
Each transmitter can be configured and verified using the integral buttons.
Alternatively, the Rosemount 3102 and Rosemount 3105 can be configured and
verified using a Field Communicator, Rosemount 3490 Series Control Unit, or a
PC running AMS Device Manager (see
The parameters described in this section are sufficient for a basic level
application.
For menu maps and how to configure more advanced level, contents (volume),
or open channel flow applications, refer to the Rosemount 3100 Series
Reference
Note
Transmitters are pre-configured for level measurement. It may not be necessary to
proceed with this step unless needing to verify or change the settings.
Figure 11. System Architecture
C
A
B
A. Rosemount 3100 Series Transmitter
B. Remote temperature sensor (optional accessory for the 3102 and 3105 only)
C. Two relay outputs (on the Rosemount 3102 only)
D. Rosemount 3490 Series Controller
E. Field communicator
F. HART modem
G. AMS Device Manager
H. Control system
J. 751 Display
14
Manual.
J
D
3490
Model type:
3491
Figure
11).
F
E
September 2018
H
G