Emerson Rosemount 3101 Quick Start Manual page 21

September 2018
7. Repeat steps (5) and (6) until the last digit is flashing and edited as required.
8. Press the blue button → to confirm the new value (flashing stops).
9. Press the red button ↵ to save the new value, or press the blue button → to
not save. Afterwards, depending on the action taken, either the "
menu or the next menu appears.
Method: Field Communicator or AMS
Device Manager
To view or change the scale factor:
1. From the Home screen,
select 2: Configure.
2. Select 2: Manual Setup.
3. Select 3: Profiling.
4. Select 4: Scale Factor P013.
5. Input the factor and press ENTER to save it.
6. Press SEND to update the transmitter.
Method: Rosemount 3490 Series Control Unit
To view or change the scale factor:
1. From the Main Menu screen, select
SETUP.
2. Select the transmitter
(e.g. "Tx1: 3102").
3. Select DUTY and then select
PV Scale Factor.
4. Follow the on-screen instructions to edit and save the new factor.
Quick Start Guide
Scale Factor P013
1
1
q w e r t y u i o
a s d f g h j k l
Lock @ &
Shift z x c v b n m á ü
HELP DEL ESC
(Field Communicator Screen)
PV Scale Factr P013
1.000
Esc=Quit
(Rosemount 3491 Screen Shown)
"
SCALE
/ 7 7 7
*
.
-
4 4 4 FN
+
0 1 1 1
ENTER
=Edit
21