Emerson Rosemount 3101 Quick Start Manual page 17

September 2018
Method: Integral buttons
To view or change the Bottom Reference (
1. From the PV display, press the green button ↓ to indicate "b.rEF".
2. Press the blue button → to indicate the present b.rEF value.
3. If this value is correct, press the red button ↵ and then the green button ↓
to get to the next menu. Otherwise, continue with step (4).
4. Press the blue button → to start editing (first digit flashes).
5. Use the green button ↓ to edit the flashing digit.
6. Press the blue button → to move to the next digit (that digit flashes).
7. Repeat steps (5) and (6) until the last digit is flashing and edited as required.
8. Press the blue button → to confirm the new b.rEF value (no digits flashing).
9. Press the red button ↵ to save the new value, or press the blue button → to
not save. Afterwards, depending on the action taken, either the "b.rEF" menu
or the next menu appears.
Method: Field Communicator or AMS
Device Manager
To view or change the Bottom
Reference:
1. From the Home screen, select
2: Configure.
2. Select 2: Manual Setup.
3. Select 1: Basic Setup.
4. Select 2: Bottom Reference P010.
5. Input the new bottom reference and press ENTER to save it.
6. Press SEND to update the transmitter.
Method: Rosemount 3490 Series
Control Unit
To view or change the Bottom
Reference:
1. From the Main Menu screen, select
SETUP.
2. Select the transmitter (e.g. "Tx1: 3102").
3. Select DUTY and then select Bottom Ref.
4. Follow the on-screen instructions to input and save the new setting.
Quick Start Guide
) setting:
b.rEF
Bottom Reference P010
36.000 ft
36.000 ft
q w e r t y u i o
a s d f g h j l
Lock k
z x c v b n m
Shift
HELP DEL
(Field Communicator Screen Shown)
Bottom Ref.
36.000ft
Esc=Quit
(Rosemount 3491 Screen Shown)
/ 7 8 9
*
.
- 4 5 6
@ & FN
á ü + 1 2 3
0
ESC ENTER
P010
=Edit
17