Troubleshooting
Power Up Troubleshooting
Power Up Troubleshooting
If the display is operational but the unit does not boot up successfully:
• Make sure there is sufficient power for the unit to operate.
• Try re-installing firmware using the firmware upgrade process described in
• Assume corrupted firmware on the A6 SOM board, follow the
the end of
Chapter
7.
If the display is dark but the unit may have booted successfully:
• Wait for three minutes to make sure the boot process has completed, then press any front panel key.
If the boot process has completed successfully, the keypad will flash when a key is pressed.
4-6
FieldFox Analyzer
Chapter
8.
"Install Firmware from SD Card"
near
N9927-90003