Safety Warnings - Eaton Powerware Series User Manual

Chapter 2

Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
S
This manual contains important instructions that should be followed during installation and maintenance
of the Power Distribution Rack (PDR). Please read all instructions before operating the equipment and
save this manual for future reference.
S
The PDR is designed for industrial or computer room applications, and contains safety shields (interior
barriers) behind the doors. The PDR system is a sophisticated power system and should be handled with
appropriate care.
The PDR contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED
SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the PDR.
S
To reduce the risk of fire or electric shock, install this PDR in a temperature and humidity controlled,
indoor environment, free of conductive contaminants. Ambient temperature must not exceed 40°C
(104°F). Do not operate near water or excessive humidity (95% maximum). The system is not intended for
outdoor use.
S
Ensure all power is disconnected before performing installation or service.
S
Keep the PDR doors closed to ensure proper cooling airflow and to protect personnel from dangerous
voltages inside the unit.
S
Do not operate the PDR close to gas or electric heat sources.
S
Locate the PDR on a concrete or other non−combustible surface only.
S
The operating environment should be maintained within the parameters stated in this manual.
S
Keep surroundings uncluttered, clean, and free from excess moisture.
S
Use leveling feet only for distributing the weight of the cabinet equally. Using the leveling feet to raise
the cabinet may result in serious injury to personnel or damage to the cabinet.
S
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the
equipment.
EATON Power Distribution Rack (208V) User's Guide
D A N G E R
W A R N I N G
C A U T I O N
S
164201720 Rev 1 www.powerware.com
5