General Safety Information - Eaton Crouse-Hinds Series Instruction Manual

Safety instructions for installation and operating personnel
See Appendix on ATEX certification for countries in EEC, or governed by these standards.
The operating instructions provided here contain essential safety instructions for installation personnel and those engaged in the
operation, maintenance and servicing of the equipment.
Failure to comply with these instructions can endanger the lives or health of personnel and risk damage to
The responsibility for planning, installation, commissioning, operation and maintenance, particularly with
Before commencing installation or commissioning:
• Read and understand the contents of this manual
• Ensure installation and operating personnel have received adequate training for this task
• Ensure that any operating instructions are fully understood by the personnel responsible.
• Observe national and local installation and mounting regulations (e.g. IEC 60079-14).
These assemblies may not be used in explosion-hazard area applications if they have been used
During operation:
• Make the relevant instructions available at all times to the operating personnel.
• Observe safety instructions.
• Observe national safety and accident prevention regulations.
• Operate the equipment within its published specification.
• Servicing, maintenance work or repairs not described in this manual must not be performed without prior agreement
with the manufacturer.
• Any damage to this equipment may render its explosion protection null and void.
• No changes to any of the components that might impair their explosion protection are permitted.
If any information provided here is not clear:
• Contact Eaton's MTL product line or one of its representatives.
Note: Improper installation and operation of the enclosure can result in the invalidation of the guarantee.
Related documents
Datasheet Description
EPS9108-22 4-segment, redundant, FISCO power supply system for Yokogawa CENTUM CS3000 Control Systems
iv

GENERAL SAFETY INFORMATION

the plant and the environment.
respect to applications in explosion-hazard areas, lies with the plant operator.
previously in general electrical installations.
WARNING !
WARNING !
WARNING !
INM9108 Rev 3