Table of Contents
Advertisement
Version B – rigid engine mount-
ing with standalone generator
1.
Check that securing screws (1, 2, 3) and base
frame screw connections (arrowed) are tight.
2.
Use a torque wrench to tighten loose screw connections (1, 2) to specified tightening torque.
Name
Screw
3.
Use a torque wrench to tighten loose screw connections (3) to specified tightening torque.
Name
Screw
4.
Tighten loose base frame screw connections (arrowed).
Size
Type
M20
Control torque
Size
Type
M16
Control torque
MS15038/01E 2018-11 | Engine Mounting / Support | 329
Lubricant
Value/Standard
(Engine oil)
500 Nm +50 Nm
Lubricant
Value/Standard
(Engine oil)
250 Nm +25 Nm
Advertisement
Table of Contents
