Table of Contents
Advertisement
3.
Remove filter element (1) from housing (2).
4.
Insert new filter element in housing.
5.
Install cover with new O-ring.
6.
Tighten cover screws to specified torque using a torque wrench.
Name
Screw
7.
Replace further oil separator filter elements in the same way.
Replacing oil separator element
– Variant B
1.
Remove securing screws (2) for cover (1)
with screwdriver.
2.
Remove cover (1) and O-ring.
Size
Type
Tightening torque
Lubricant
(Engine oil)
MS15038/01E 2018-11 | Crankcase Breather | 227
Value/Standard
6 Nm +2 Nm
Advertisement
Table of Contents
