Operating Instructions - Clas Ohlson SBL-2806 Manual

The spinner head fits over
the motor spindle.

Operating instructions

The candy floss machine comes completely assembled. Before using it for the first
time it must be disassembled and cleaned.
Disassembly
1. Carefully remove the locking ring (3) and then the splash guard (4).
2. Release the bowl (2) by rotating it until the plastic tabs disengage from the metal
locking tabs on the motor unit. Then remove the bowl by carefully lifting it upwards.
3. Remove the spinner head (5) by lifting it straight upwards.
4. Follow the instructions under Care and maintenance.
After cleaning, assemble the parts in reverse order to the directions described above.
Be especially careful that the bowl is securely locked into position and that the plastic
tabs on the bowl lock onto the metal tabs on the motor unit.
Make sure that the notch in the spinner head spindle is precisely aligned with the pin
on the motor unit spindle when attaching.
Remove the spinner head.
Metal locking tab
5