Operating Instructions - Clas Ohlson SBL-2807 Manual

The extractor head fits over
the motor's spindle.

Operating instructions

The candy floss machine comes completely assembled. Before using it for the first
time it must be disassembled and cleaned.
Disassembly
1. Remove the locking ring (3) and rim (4) by carefully removing the locking ring.
2. Remove the bowl (2) by rotating it until the plastic tabs disengage from the motor
unit's metal locking tabs. Then remove the bowl by carefully pulling it upwards.
3. Remove the extractor head (5) by pulling it straight upwards.
4. Follow the instructions under Care and maintenance.
After cleaning, assemble the parts in reverse order to the directions described above.
Be especially careful that the bowl is securely locked into position and that the bowl's
plastic tabs lock onto the motor unit's metal locking tabs. Make sure that the groove
in the extractor head is precisely aligned with the pin on the spindle of the motor unit
when attaching it.
Remove the extractor head.
Metal locking tab
5