Clas Ohlson SBL-2806 Manual page 3

• To prevent electric shocks, the product and its mains lead
should be kept dry.
• Never lay the mains lead over hot surfaces, sharp edges or
corners.
• Always disconnect the product from the power supply by
holding and pulling the plug. Do not pull the mains lead.
• Make sure that all parts are correctly assembled and that
the product is switched off before it is connected to the power
supply.
• Never use the product close to heat sources.
• Only use the included accessories.
• Never use the product for anything other than its intended use.
• The mains lead should be checked regularly. Never use
the product if the mains lead or plug is damaged.
• The mains lead must be changed if damaged. This is to prevent
the risk of electric shock or fire and should only be carried
out by the manufacturer, qualified service facility or qualified
technician.
• Do not touch any hot machine parts, as burn injuries may result.
• Never touch any moving parts while the product is in operation.
• Never leave the product unattended during use.
• The product must never be used with a timer, remote control or
other equipment which turns the power on automatically.
• The product is subject to overheating if used continuously for
more than 30 minutes. Therefore, the product must be allowed
to cool for at least 10 minutes for every 30 minutes of use.
Use the cooling off period to clean out the bowl before reuse.
Allowing the machine to overheat may pose a fire hazard.
3