Install Steel Balls - Scott 10,000 Instruction Manual

2 Installation
Fig. 2-28. Tighten Mounting Block Screws
CROSS CONVEYOR LINKAGE
Fig. 2-29. Attach Cross Conveyor Linkage
Fig. 2-30. Install Ball Bearings
2- -16
MOUNTING BLOCK
REGISTER BOARD
HOLD DOWN PLATE
PILE FEED
HOLD- -DOWN
BAR
Step: 3. Lightly tap mounting block with a rubber
mallet to align.
Step: 4. Tighten socket head screws in cross
conveyor mounting block.
Step: 5. Attach the cross conveyor linkage.
2.3.7

Install Steel Balls

Step: 1. Install steel balls in the register board
hold--down plate and the pile feed
hold--down bar.
C9999- -2 Issue 1