Table of Contents
Advertisement
Fig. 2-7. Align Tab Cutter Assembly with Main
Machine
SHAFT
Fig. 2-8. Reinstall Tab Cutter Shaft
Fig. 2-9. Secure Tab Cutter Shaft
C9999- -2 Issue 1
MAIN MACHINE FRAME
TAB CUTTER
Step: 2. Remove Tab Cutter assembly from skid
and position it to left of the main machine
(as viewed from the front).
Step: 3. Align support shaft holes in Tab Cutter
assembly with holes in the main machine
housing.
CAUTION!
THIS PROCEDURE REQUIRES 2- -3
PERSONS.
Step: 4. Reinstall reregister extension frame
mounting shaft through the Tab Cutter
assembly and the gusset in the main
machine frame.
Step: 5. Secure the tab cutter shaft with socket
head screw.
2 Installation
2- -7
Advertisement
Table of Contents
