Scott 10,000 Instruction Manual page 31

HEATER ROLLERS
REGISTER
DRIVE
CHAIN
REGISTER DRIVE CHAIN TENSIONER
Fig. 2-20. Heat Roller Positions (Front)
Step: 6. Make sure all heaters are aligned as shown above.
Step: 7. Install register drive chain.
1" DEFLECTION
Fig. 2-21. Tighten Chain Tension
C9999- -2 Issue 1
Step: 8. Adjust register drive chain tensioner so
that there is approximately one inch (1/2"
either side of centerline) of deflection in
chain.
2 Installation
REPRESENTS
SPROCKETS
2- -13