Fig. 2-31. Install Vacuum Canister
HOSE CONNECTION
Fig. 2-32. Connect Vacuum Hose
Fig. 2-33. Install Vacuum Valve
C9999- -2 Issue 1
VACUUM HOSE
CHIP REMOVAL
VACUUM OUTLET
VACUUM
VALVE
2.3.8
Connect Vacuum Canister
Step: 1. Once the machine is in place, assemble
the vacuum blower and canister.
Step: 2. Route the vacuum hose under the tab
cutter end of the machine and connect to
the opening under the Tip Die assembly.
Step: 3. Plug power cord for vacuum blower into
auxiliary outlet located on the back of the
machine.
2.3.9
Install Vacuum Valve
Step: 1. Install vacuum adjustment valve.
2 Installation
2- -17