Maintenance; About Camera - Wansview K2 User Manual

2.6.6 Maintenance

Reboot camera if camera is always loading or if the camera/app is frozen. No need to set
up again. If camera restores to factory default, the set up procedure needs to be repeated
again after reboots.

About Camera

2.6.7
Here user can check the camera information, such as Firmware, P2P version, IP
Address and Mac Address.
For Wan IP address, if the Lan ip address is not port forwarded in router(the camera
connected with), it cannot be accessed from outside network.
www.wansview.com
25
25