Information And Tasks While Printing - SINTERIT Lisa User Manual

12. Clean any excess powder from the area around the BEDs, the guide bar and the wire of
the Recoater, using a paintbrush.
13. Lubricate the plain bearing of the Recoater with the included silicone grease.
14. Press DONE and gently close the Lid.
IMPORTANT!
If the quality of distributed powder is unsatisfying, close upper lid and press
"Back" button. Unlock the Lid and start the Leveling procedure/process
again.
. 15. Press "Start Printing" button and the printing process will start.
16. Upon confirmation, the progress of printing process will appear on the screen.
A. Information and tasks while printing
1. The main screen of the graphical user interface displays the status of the print in real
time, current temperature of the BEDs, warming and cooling states, and the remaining
time of laser sintering.
34
​
Sinterit Lisa USER MANUAL