YOKOGAWA Total Insight series Quick Reference Instruction Manual page 25

Transmitter installation
Rotating and replacing the display
The transmitter display can be oriented in line with the flow meter installation position.
The following instruction must only be performed at the following ambient conditions:
NOTICE
▶ at temperatures up to 31 °C: relative humidity maximum 80 %
▶ at temperatures between 31 °C and 40 °C: from 80 % linearly decreasing to 50 % of
1. Switch off power supply.
2. Using an Allen wrench (size: 3.0), turn the locking screw on display screw plug clock-
3. Unscrew display cover from transmitter housing.
4. Remove the two screws from the display.
maximum relative humidity
wise to remove.
IM01U10A00-00EN-R, 2nd edition, 2017-08-29
Quick Reference Instruction Manual
Installation
25 / 54