Aircard Software Installation Procedures; Windows 95 Pre-Installation Procedures - Sierra Wireless AirCard 555 User Manual

AirCard 555 Network Card User Guide
24
Table 3-1: System Resource Requirements
I/O Resources 1 IRQ, 40 bytes I/O Space
Memory 32 MB
Disk Space 7 MB
AirCard Software Installation
Procedures
This section provides detailed installation instructions.
Proceed to the heading that corresponds to your operating
system.

Windows 95 Pre-Installation Procedures

Note: Windows system files may be required to complete installation
of the AirCard 555 driver. These files are located on the Windows CD
and may be stored on your hard drive in CAB files. Ensure you have
your Windows CD, or know the location of the .CAB files before
proceeding.
Depending on how Windows 95 was installed on your PC and
what devices have since been installed, your PC Card
(PCMCIA) slots may or may not have been enabled and the
TCP/IP stack may or may not be installed. Since the AirCard
requires these, this section guides you through these steps:
1. Verifying that the PC Card slots are enabled
2. Verifying that TCP/IP is installed
Verifying That the PC Card Slots Are Enabled
1. Open the Control Panel by selecting
Control Panel
.
2. Double click the PC Card icon.
3. If the PC Card (PCMCIA) Properties window is displayed,
the slots are enabled and you can proceed to the section
"Verifying That TCP/IP Is Installed".
4. If the PC Card (PCMCIA) Wizard is displayed, the slots
are not yet enabled, and the wizard guides you through
the enabling process. (Generally it is sufficient to click
at each window.) Click
Yes
click when prompted to restart the PC.
Start > Settings >
Finish
on the final window and
Next
2130142