Sierra Wireless AirCard 555 User Manual page 137

Rev 3.3 May.02
Table 13-1: The Watcher Dial-Pad
Dial Pad
Buttons
0-9, #, * Use these buttons to enter the digits (and other
characters) you want to dial. The numbers are
displayed in the call status area until you tap
SEND, END, or CLR, or you receive an
incoming call.
Any of these buttons can be used to answer an
incoming call if the Any-Key Answer feature is
enabled.
If you tap these buttons during a call, the
AirCard beeps and the characters are displayed
in the call status area.
SEND Use this button to dial and to answer incoming
calls. When you are not receiving an incoming
call, tapping SEND dials the numbers in the call
status area. If no numbers are displayed,
Watcher re-dials the last number you dialed.
END Use this button to hang-up or end a call, or to
clear all the digits and characters in the call
status area (i.e. to cancel a call that you've
started to enter). This button also clears status
messages.
CLR Use this button to clear the last number you've
entered. If you hold this button down for one
second, it has the same effect as the END key.
This button can also be used to hang-up or end
a call.
Volume Use the Up Arrow to increase the headset
Buttons volume you hear. Use the Down Arrow to
decrease the volume. When there is no call in
(Up Arrow and progress, use these buttons to adjust the
Down Arrow) volume of the beep that occurs when you tap
the dial pad buttons.
Mute Button Use this key during a call to prevent the caller
from hearing what you say.
When no call is in progress, this key enables
and disables the Silent Ringer feature.
Chapter 13: Voice Connections
Function
137