Outgoing Calls; Incoming Calls - Sierra Wireless AirCard 555 User Manual

Note: You cannot make a phone
call when there is a data
connection.
Note: If you tap the SEND
button without entering a
number, the AirCard redials the
last number you dialed.
Note: The Options window,
displayed when you select
Tools > Options, allows you to
customize the sound played
when you receive an incoming
call and to enable and disable
the Silent Ringer feature.
Note: If an incoming call occurs
while you have a data
connection, your caller will get a
busy signal or be put through to
your voice mail box.
Rev 3.3 May.02

Outgoing Calls

To initiate a call:
1. Connect a headset to the AirCard, if one is not already
connected.
2. Enter the number you want to dial by tapping the number
buttons on the dial pad.
SEND
3. Tap the button.
As the call is being dialed, Watcher displays "Dialing" and the
phone number.
You can also dial a number from the phone book (see
page 150) and from the call log (see page 151).

Incoming Calls

Depending on how certain features are configured, when you
receive an incoming call the following occurs:
• On Handheld PCs, if Watcher is in compact view, it
switches to full view.
• A sound is played, unless the Silent Ringer feature is
enabled.
• If you have Caller ID, the phone number and, if available,
the name of the caller are displayed.
• If the Data tab is displayed, Watcher switches the display
to the Voice tab.
To answer a call:
1. Connect the headset, if it is not already connected, and put
it on.
SEND
2. Tap the button. (Or, if the Any-Key Answer feature
is enabled, tap any key except
PC, you can also use any of the four application buttons.
On the Handheld PC, you can also use keys on your
keyboard: A through Z, 0 through 9 and the * or # key)
Chapter 13: Voice Connections
END CLR
or . On the Pocket
139