Card Insertion And Removal; Inserting The Aircard; Aircard 555 Wireless Network Card User Guide - Sierra Wireless AirCard 555 User Manual

Wireless network card
Hide thumbs Also See for AirCard 555:
Table of Contents

Advertisement

AirCard 555 Network Card User Guide
Note: If you are unable to
establish a connection, launch
ActiveSync from the Start menu
and use the online help in
ActiveSync.
120
·
Place your Pocket PC in its cradle and connect the USB
cable on the cradle to a USB port on your host PC, or
·
Align the infrared port on your Pocket PC with an
infrared port on your host PC.
Handheld PCs:
·
Place your Handheld PC in its docking cradle and
connect the serial cable on the cradle to a serial port on
your host PC, or
·
Align the infrared port on your Handheld PC with an
infrared port on your host PC.
ActiveSync should launch automatically when the host
and Handheld/Pocket PC are connected.
2.
If you are prompted to indicate whether you want to set
up a partnership, click
purpose of downloading the AirCard software, it does not
matter whether you have a partnership.) You should then
be prompted that there is software to download.
Yes
3.
Click
to start the download. When complete, you will
be prompted to check your mobile device screen to see if
additional steps are required.
OK
4.
Click
.
5.
Reset your Handheld/Pocket PC by inserting the stylus
into the reset button. (The reset button is usually a circular
indentation that may be on the keyboard of the Handheld
PC or the bottom of the Pocket PC. Consult the documen-
tation that came with your PC if you do not know how to
reset the device.)
On completion of this step, the software and driver are
installed and you can proceed to configure the AirCard to use
your account (if it was not pre-activated). This is described in
the "Account Configuration Procedures" section on page 121.

Card Insertion and Removal

Inserting the AirCard

To insert the AirCard 555 into a Pocket PC:
1.
If the PCMCIA jacket accessory is not already attached,
slide the Pocket PC bottom first into the jacket. It should
click into place.
2.
Attach the antenna to the circular copper connector on the
end of the AirCard. DO NOT FORCE.
Yes
No
Next
or
and click
. (For the
2130142

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents